Click image to view full size image
Glued hooked steel fiber: Glueding single hooked steel fiber one by one in line with water soluble glue to keep the steel fibers evenly dispersed, no gobbet
Dispersion for first time: putting the steel fibers to conveyor, the glued steel fiber as a whole dispersed to every corner.
Dispersion for second time: after first dispersion, water soluble glue begins to dissolve, the whole glued steel fiber in each corner begins to disperse and become many single steel fiber, then, become a three-dimensional netting, increasing reinforcement effect.
Material: round cold drawn wire.
Wire diameter(D):0.51.0mm (±0.05mm)
Fiber length(L):25-60mm (±0.05mm)
Aspect ratio L/D: 40-80
Tensile strength:>1100Mpa
Elongation at break:<4%
Appearance: bright and clean wire
Package and storage
20kg or 25kg/damp-proof poly and paper composite bag.50bags or 40bags/pallet.
The pallets should be protected against rain and snow
Product Standard
EN14889-1type1(cold drawn wire)
SATM A820/A820M-04 type1(cold drawn wire)
Features & benefits (comparing with common concrete)
| Tensile strength (%) | Against pressure (%) | Against shear (%) | Against bending (%) | Against impact (%) | Against fatigue (%) | Wear resistance (%) |
| 50-70↑ | 8-10↑ | 50-100↑ | 120-180↑ | 200-700↑ | 50-60↑ | 25-35↑ |
Energy Absorption (joule): 1200-1400 joule, if dosage 40-60kg/M3.
min dosage 20kg/M3
Application
Industrial floor, Precast, Tunnel, Bridge, Highway pavement, Airport.
Best regards
Molly
Anping SanQi Wiremesh Co.,Ltd
Ziwen industry park,Anping,hebei,China
Tel:86-311-80663697
Fax:86-311-87038168
Email: sales@sqgabion.com
Website: www.sqgabion.com
glued steel fiber
